Hook wrenches LOCKNUT-HOOK can be used to dismount no only bearings but also withdrawal sleeves
with the aid of extraction nuts. Hook wrenches are available in sizes suitable for locknuts KM0 to KM40.
Other sizes available by agreement.
The joint allows one hook wrench LOCKNUT-FLEXIHOOK to be used for mounting or dismounting
locknuts of various sizes.
The jointed pin wrench LOCKNUT-FLEXIPIN is hooked into radially arranged holes in the nut.
The jointed face wrench LOCKNUT-FACEPIN is hooked into axially arranged holes in the nut.
Double hook wrenches LOCKNUT-DOUBLEHOOK are intended for the mounting of self aligning ball
bearings with a tapered bore. They are available as kits, sets or individual wrenches. The double hook
wrench kits and sets contain a torque to be achieved at the start of the mounting operation. Double
hook wrench sets are suitable for several sizes of locknuts. Each double hook wrench is engraved with
the torsion angles for the appropriate self-aligning ball bearings. The drive-up distance and reduction in
radial internal clearance can therefore be precisely set.